56" wide Ford 9 Inch Round Back Rear End Housing Kit with 31 spline axles & hdwe

Description

Ford 9 Inch Round Back Rear End Housing Kit with 31 spline axles and hardware.
56" wide track width; Centered rear end pinion yoke between wheel flanges when center section is installed.
we can install 3/4 npt drain plug on bottom of housing if requested
The rear end kit will ship via UPS Ground
or Speedee Delivery in the upper Midwest
this rear end will measure 56" wide when big bearing 9" Ford Axles are installed with 2.5" brake spacing.
flanged 31 spline axle axles have 3.15" bearings installed
axles are cut to length to match the housing, 29.56" passenger side and 25.31" driver side.
axles have three bolt patterns in all axles, 5 x 4.5" small ford, 5 x 4.75" GM and 5 x 5".
Housing will measure 51" from housing end to housing end without axles
1/2" press in wheel studs included, 1.5" long for street and custom wheels.
reconditioned small web hump back center with new 3" x .188" wall DOM tubing.
tubes are sleeved for strength
housing ends;  New Style Big Ford (Torino) with .375" (3/8) bolt holes, refer to housing end drawing in Pictures.
4 bolt axle retainers included, will match housing ends.
3/8" T-bolts kits included, will match housing ends.
new studs installed in housing
Most of the housings have a stock fill plug in back cover
Note from seller:
These are
Reconditioned
centers and they will have pitting and dings.  We also offer New housings with New stamped centers and they can be found in our other listings… Please see last picture for example…
We will build the center section after you give us the housing ends you want.  Usually build time is 3-4 days.
WARNING: Cancer
And Reproductive Harm-
www.P65Warnings.ca.gov